FAQ

Watch The Video

Step 1: Remove the HX TAG from the packaging.

Step 2: Bend the HX TAG  around the dowel rod, then press and roll the outer tips of the HX TAG on a hard surface to achieve a nice and even curve.

Step 3: Before removing the backing, press the HX TAG to the bottle and ensure it sits flush. Make sure the outer tips are pressed tightly against the bottle. If you notice that they are slightly raised, repeat step 2.

Step 4: Once the HX Tag is properly rolled, clean the bottle's surface with rubbing alcohol and wipe with a soft rag.

Step 5: Peal the backing and lightly line up the HX Tag on the bottle, ensuring it is level and straight before pressing down.

Step 6: Once you are satisfied with the placement, press down in the center of the tag and smoothly adhere it to the bottle, starting from the center and working your way out.

By following these steps, you'll achieve a well-applied curved HX Tag.